Proxicast LAN-Cell 2 Guía de usuario descargar pdf (Pagina 54)

100

101

Chapter 3 Tutorials: 3G Modem Setup & VPN Wizard

LAN-Cell 2 User’s Guide

3.1.2 Configuring 3G WAN Settings

You should already have an activated user account and network access information from the

service provider.

1 Click WIRELESS > Cellular on the LAN-Cell.

2 Make sure that the Cellular interface is Enabled.

3 For GSM networks such as AT&T, T-Mobile, Rogers, Vodafone, Orange, MTN, etc.,

enter the APN (Access Point Name) and phone number (typically *99#) that were

provided by your service provider.

4 For CDMA networks such as Verizon Wireless, Sprint, Alltel, Telus, etc., the APN field

is not required or displayed. The ISP access phone number is typically #777 for CDMA

networks.

5 Select the authentication type used by your service provider. If it was not given, leave

the field at the default (None).

6 If required by your network operator, also enter the user name, password, and PIN code

used for network access. If your service provider didn’t provide this information,

contact your service provider.

7 If you want the Cellular WAN connection to stay connected at all times, select “Always

On”, otherwise indicate how long to wait before the LAN-Cell drops the 3G connection

when no data activity is detected. Note: this will “hang up” the 3G connection and is not

the same as the radio “Dormant State” that 3G PC-Cards go into when not transmitting

data.

8 For WAN IP Address Assignment, select Get Automatically from ISP. This is the

correct setting in most situations, even if your carrier has assigned a “static” IP address

to your 3G card.

9 Click Apply.

Figure 22 Tutorial: WIRELESS > Cellular (3G WAN) - CDMA Example

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 649 650

Comentarios a estos manuales

Sin comentarios

Proxicast LAN-Cell 2 Guía de usuario Pagina 54

Comentarios a estos manuales