Proxicast LAN-Cell 2 Guía de usuario Pagina 125

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 650
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 124
Chapter 5 WAN & 3G Cellular Screens
LAN-Cell 2 User’s Guide
125
5.6.1.2 DTR Signal
The majority of WAN devices default to hanging up the current call when the DTR (Data
Terminal Ready) signal is dropped by the DTE. When the Drop DTR When Hang Up check
box is selected, the LAN-Cell uses this hardware signal to force the WAN device to hang up,
in addition to issuing the drop command ATH.
5.6.1.3 Response Strings
The response strings tell the LAN-Cell the tags, or labels, immediately preceding the various
call parameters sent from the WAN device. The response strings have not been standardized;
please consult the documentation of your WAN device to find the correct tags.
5.6.2 Configuring Advanced Modem Setup
Click the Edit button in the Dial Backup screen to display the Advanced Setup screen.
" Consult the manual of your WAN device connected to your dial backup port for
specific AT commands.
Figure 65 NETWORK > WAN > Dial Backup > Edit
Vista de pagina 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 649 650

Comentarios a estos manuales

Sin comentarios